Part Number Hot Search : 
DT8210 28C51 2SC5114 DTD113 2SD1164K TL494 200MA 30CTP
Product Description
Full Text Search
 

To Download EX-2000-EET-308 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EX-200
Evacuated Miniature Crystal Oscillator
EX-200
Description
The EX-200 Series o ers a ruggedized hybrid thick lm construction in a low pro le hermetically sealed 16pin DDIL package, which can withstand severe environmental conditions. This product utilizes VI's EMXO technology resulting in excellent stability performance and fast warm-up with low power consumption.
Features
* * * * Ruggedized hybrid thick lm construction Low Power Consumption Previous Model: EX-240 series Frequency Range: 10 MHZ - 20 MHZ
Applications
* Severe Environmental Conditions
Performance Speci cations
Frequency Stabilities1 Parameter
vs. operating temperature range (referenced to +25C)
Min
-20 -30 -50
Typ
Max
+20 +30 +50
Units
ppb ppb ppb
Condition
-0... +70C -20... +70C -40... +85C
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Performance Speci cations
Frequency Stabilities1 Parameter
Initial Tolerance (for xed frequency) vs. supply voltage change vs. load change vs. aging / day vs. aging / 1 year vs. aging / 10 year vs. aging / 10 year vs. aging / 10 year Warm-up Time
Min
-1.0 -10 -10 -2.0 -200 -1000 -1500 -2000
Typ
Max
+1.0 +10 +10 +2.0 +200 +1000 +1500 +2000 90 120
Units
ppm ppb ppb ppb ppb ppb ppb ppb seconds seconds VDC VDC Watts Watts
Condition
at time of shipment, nominal EFC VS 5% Load 5% after 7 days of operation 10 to <12MHz 12 to <16MHz 16 to 20MHz to 1ppm of nal frequency @+25C to 100ppb of nal frequency @+25C
Supply Voltage (Vs)
Supply voltage (Standard) Supply voltage (Option) Power Consumption 4.75 3.135 5.0 3.3 5.25 3.465 2.5 0.7 HCMOS 15 0.1 0.9 +7 40 60 Sinewave 50 0 +3.0 +1.5 +4.5 +3.0 +6.0 -25 -60 Fixed; No adjust Su cient to compensate for 10 years aging EFC (0V to 4Vdd) ohm dBm dBm dBc dBc 50 ohm load 50 ohm load pF VDC VDC ns % (10-90%) (Voh-Vol)/2
during warm-up steady state @ +25C
RF Output
Signal [Standard] Load Signal Level (Vol) Signal Level (Voh) Rise/Fall Time Duty cycle Signal [Option] Load Output Power (Standard) Output Power (Option) Harmonics Sub-Harmonics Tuning Range Tuning Range
Frequency Tuning (EFC)
Additional Parameters
-100 -130 -140 -145 -150 1 0.2 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ppb/g ppb 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz Test at 10g sine vibration at 100Hz Tau = 1 sec
Phase Noise @ 10 MHz
G-Sensitivity Allan Deviation
Environmental Conditions (Designed to meet)
* Mechanical Shock (survive) * Vibration Random (survive) * Vibration Sine (survive) * Thermal Shock (survive) MIL-STD-202, Test Method 213, Condition E (100G, 0.5msec) MIL-STD-202, Test Method 214, Condition I-H (20Grms, 3 minutes/axis) MIL-STD-202, Test Method 204, Condition D (20Grms, 20 minutes/axis) MIL-STD-202, Test Method 107, Condition A-2 (50 Cycles, -55C to +85 C)
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in inches
Type A
Code 0 Height "H" 0.35" Pin Length "L" 0.17"
Pin Connections
1 2-4 8 9 13 - 15 16 EFC \ No Connect No Connect Ground (Case) RF Output No Connect Supply Voltage Input
Recommended Re ow Pro le
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Ordering Information
EX - 200 0 - D A J - 508 0 - 10M0000000
Product Family EX: EMXO Package 25 x 25 mm Height 0: A0.35" Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS E: Sinewave Frequency Frequency Control 0: Fixed Frequency (HCMOS) 1: Fixed Frequency (0 dBm) 2: Fixed Frequency (+3 dBm) 3: Electrical Tuning (HCMOS) 4: Electrical Tuning (0 dBm) 5: Electrical Tuning (+3 dBm)
Stability Code 208: 20ppb 308: 30ppb 508: 50ppb
Temperature Range E: -40C to +85C J: -20C to +70C T: 0C to +70C
Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328
Europe:
Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30
Asia:
Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Rev: 11-25-2008 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com


▲Up To Search▲   

 
Price & Availability of EX-2000-EET-308

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X